Next up, bigger brakes on the stock front spindles and drum hubs. Note: you need at least a 17" rim. kore3 has templates that you can print out and check to see if it will fit.

First I started with a set of stock drum hubs. I ended up getting four of them. Two of them were free minus the shipping. So, now I have an extra set.

The first thing on the list was to get the face of the hub turned down and add a 45 degree angle so the C6 corvette rotor will fit correctly.

Next I ran a thread chase down all the threads, removed the seals,races, and bearings. Then gave them a quick sand blast.


A little primer and brake paint and then new seals and bearings.

Next I removed the dust shields and caliper brackets.

Next up will be buying a kit from kore3.com to mount the C6 corvette brakes on the car. I will post more after I buy the kit.