OER Kick Panels - 09/11/18 02:05 AM
OER kick panels K484 & K485 are missing the push nut to hold the operating cable on the flap stud. Diameter of stud is 5/32". Unfortunately local hardware stores only had 1/8" or 3/16". With a little careful bending and trimming I was able to use the rectangular 1/8" variety.
Wish I would have noticed missing push nuts prior to wrestling the first kick panel into place and having to wrestle it back out.
On a positive note, panel seemed to fit decent however it was not screwed in.
Wish I would have noticed missing push nuts prior to wrestling the first kick panel into place and having to wrestle it back out.
On a positive note, panel seemed to fit decent however it was not screwed in.