For Sale: Original GM emissions control valve. This one came directly off my '68 400HO (4 speed manual). Completely untouched, even includes 50 years of light rust. (pictures show a green stripe hose attached that is unrelated but would be included). A small spatter of blue engine paint on rear of cap could likely clean off. Looking for $350. Also selling the original radiator from the same car. Core is shot, but frame seems good; could be cleaned up and re-painted.
Last edited by ReverendRW; 11/05/1810:25 PM. Reason: more pics
I saw in another section you posted pics with the valve bolted to the intake. Do you have and are you willing to sell the spacer that fits under the valve bracket? If no, could you measure it and give me dimensions, materials, etc?
To err is human. To really foul things up takes a computer.
Hi John, Sorry I didn't see your response until now!! Missed it ~ If you still need this info, see these pics. Its just a collar of lightweight steel. If your still in need of it, private email me your address and I'll send it to you. "For the Good of the Brotherhood"! Let me know if you need the bolt.
John-- I didn't get any other PM from you....Sorry. I misunderstood your last post. I confused myself: Jim vs John.... couldn't you two have more distinctive names? Try a PM again with your address for the spacer