I have some new rear quarter interior panels. The holes for the window cranks are only partially cut in the cardboard backing. Last time I did this I used an Xacto knife but wasn't real happy with the result. I'm wondering about using a leather punch or some other kind of hole punch. Anyone have an easy and successful way to do this? Thanks
Google AdSence Sponsor for FGF Forums
Re: putting holes for window cranks in repro interior qtr panels
#320139 12/06/1808:38 PM12/06/1808:38 PM
I used a very sharp Xacto knife on the back side with cardboard and wood underneath the absorb the cuts. I used very small scissors to cut the material on the front side after I had a circle of slits from the knife. I thought it came out pretty well.
1967 FB 400, original CA car (smog), now 455, soon to be out of Paint Jail 2006 Mustang V6 Pony, factory ordered, retirement cruiser and future classic(?) Old projects, gone but not forgotten: 1980 Turbo Trans Am 1970 Mustang fastback, 351C 4Bbl, auto 1988 Mustang GT, 5 speed 1983 F-150 4x4, built 302 1994 Chevy K2500 HD 4x4, 454 TBI