Does anyone have a good diagram for the lines for the hydraulic system for the power top. If the lines from the front of the pump go to the bottom of the cylinders or sides? Or where the back pump lines go? Thanks
The diagram by Gus68 offers your answer but, thinking about the operation of the pump for "up" and "down", I wonder if it really matters as long as the two cylinders are connected the same?
If you pick wrong then the up switch position will put the top down. I emailed the pump manufacturer and thier advice was hook it up and try it. If it’s wrong then swap it. I guessed right on the first try
Bob, Can't the switch under the dash be turned 180 degrees? That said, after driving mine for 50 years, I still don't remember if forward or backward on the switch is top down and visa versa. I throw the switch and if it starts moving the wrong way, I push it the other.