The horns in my 69 Firebird don't work. I've tried everything I know and looked extensively at YouTube to no avail. Apparently there is no fuse for the horn. At least I can't find one. Is that right? I put 12 volts directly to the horn (both the old one and a new one) being carful to ground the body-Nothing! What should I try next? I don't know if I have a switch problem or a relay problem or something else.
I'm a bit confused. But I do know if you run 12 volts and a ground directly to a working horn, it will sound. I tested mine off the car that way before I installed them.
1967 FB 400, original CA car (smog), now 455, in total limbo..... 2006 Mustang V6 Pony, factory ordered, retirement cruiser and future classic(?) 2019 BMW X3 (Titled to the wife, but I'm always driving it for her. So I'm claiming it) Old projects, gone but not forgotten: 1980 Turbo Trans Am 1970 Mustang fastback, 351C 4Bbl, auto 1988 Mustang GT, 5 speed 1983 F-150 4x4, built 302 1994 Chevy K2500 HD 4x4, 454 TBI
I've loosened old horns before by filling the inside with penetrating oil and letting them sit for a couple days. Sometimes it works, sometimes not. If they won't make any noise they are probably shot.