This motor was rebuilt (.030 bore) and has about 1,500 miles on it. I took the intake/carb off and the cam out, but I do have the factory intake/carb I'll throw in too. It has new pistons, connecting rods, push rods, and rockers. If you want, I'll throw in the engine stand it's sitting on. The engine is in a shed in rural Illinois, but I can get it to the St. Louis area. It's the engine that came in my car and as much as I hate to part with it I have no place to store it so it must go. It's not going to be pretty on the outside but that's easy enough to take care of but inside it should be ready to drop in your car and run.