Ram Air Kit for 1967-1968

Q: Ram Air Kit for 1967-1968

Where can I found a Ram Air kit to put in my 1968 Firebird 400.

A: There is no kit that I’m aware of for the 1967-1968 Firebird Ram Air System. A kit would consist of the Upper Hood Baffle, Lower Carb Shroud, Hood Seal, Shroud Seal, Air Cleaner Lid and open scoops.

A few years ago, Barry Martin (Sonic Motors) had the Hood Baffle reproduced. He only had around 5075 pieces stamped out (kirksite die) and vendors were selling these for $350-$425 ea. Not sure if any are still out there. The Carb Shroud is the same as 1968 GTO. Used ones go for $500 or so. I understand that someone has or is doing a Carb shroud. Figure this to be in the area of $300 or more. The foam seals are available thru most repro companies. The Carb lid is also available repro. Scoops would have to be cut out; repro’s are available. If you bought all the pieces used or repro, figure around $1500 for such a ‘kit’.

Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.