Throttle and Kickdown Hookup for 1969

Q: Throttle and Kickdown Hookup for 1969

Anyone happen to have a picture of how the throttle and kickdown cables hookup to the bracket and the Carb Lever for a 1969 4bbl with TH350? How about a good description? I’m pretty sure I have the throttle cable right but I’m not quite sure how the TH350 kickdown cable hooks up.

A: The kickdown cable snaps into a square hole on the carburetor side of the throttle bracket. If you don’t have the exact bracket you will have to improvise. A 2bbl one will not work, the cable will be 3/4″ short of the carburetor bracket. The reproduced ones for $80+ are for 1968 and don’t have the necessary square hole for a TH350. If you find a source for a four barrel cable mounted throttle bracket with the TH350 kickdown hole, let me know.

Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.