Dealer Technical Bulletin 68-T-15 – Appearance of Hood to Bumper Opening – 1968 Non-Air Conditioned Tempest
Bulletin 68-T-15 — Pontiac Motor Division Dealer Technical Bulletin, Section 11, dated March 11, 1968. Attention: Service Manager.
Subject: Appearance of Hood to Bumper Opening — 1968 Non-Air Conditioned Tempest.
Short answer: On a customer complaint basis only, improve the hood-to-bumper opening appearance on non-air-conditioned Tempests built before the breakpoints below by installing the filler panel now used on all Tempests except the GTO with Endura bumper. There is no charge to the owner.
Install Part No. 9793950 [M-3] (Gp. No. 8.155) — the filler used on all Tempests except GTO with Endura bumper. This repair applies on a customer complaint basis only at no charge to the owner.
The filler was installed on all Tempests built after the following breakpoints:
| VIN / Plant Code | VIN / Plant Code | VIN / Plant Code |
|---|---|---|
| B102511 | P117681 | Z103374 |
| B600357 | P601294 | Z600200 |
| K102068 | G104352 | |
| K600185 | G601378 |
Flat-Rate Information
| Operation No. | Time Allowance | Trouble Code |
|---|---|---|
| 115-223-00 | .2 hr. | 29 |
Content last modified: June 13, 2026 at 10:06 am
← Frequently Asked Questions
