Body Mount Alignment

Short answer: There is a ~⅝” alignment hole in the front bushing mounting platform that lines up with a matching hole in the body. Slide a pipe or tire iron through both holes to vertically align the subframe when reinstalling it.

If you are only replacing the bushings without removing the subframe, this is not necessary — doing one side at a time with the front fenders bolted in place keeps the frame in the correct position, so alignment is not affected.

Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.