Carpet Installation (One Piece)
Short answer: The one-piece ACC-style kits fit well — often better than the original. Position the carpet over the high-beam switch first and the rest pretty much falls into place.
- Rear seat-bracket bolts: don’t cut full holes — cut a three-sided ~1.5″ × 1.5″ slot and fold the flap back to drive the bolt, then fold it back over (or use a scratch awl to find the center and make a small incision). Both look factory.
- Shifter boot (manual): cut just enough for the shifter to work and leave the rest — it’s very easy to cut this hole too big; a little extra material around it doesn’t hurt.
Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.
Content last modified: June 13, 2026 at 10:06 am
← Frequently Asked Questions
