Console Removal
Short answer: The factory manual just says “remove the console,” so here’s the real procedure members use:
- Pop off the black plastic button on top (it just snaps in).
- Loosen the set screw inside the T-handle (right side) and pull the handle off the shaft.
- Remove the PRNDL shift plate — it’s held by either 4 chrome screws through the top or hidden snap-in clips (gently pry up to release the clips) so the console can slide over it.
- Remove the small screw on each side at the front of the console, plus the larger floor screws: one inside the console bin (bottom) and one under the rear cover (remove the cover’s sheet-metal screws first); some also have a bolt up in the glovebox.
Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.
Content last modified: June 13, 2026 at 10:06 am
← Frequently Asked Questions
