Ram Air Kit for 1967-1968
Short answer: There’s no factory “kit” — you assemble it from pieces: the upper hood baffle, lower carb shroud, hood seal, shroud seal, air-cleaner lid, and open scoops. Bought used or repro, figure around $1,500 all in.
The hood baffle was reproduced by Barry Martin (Sonic Motors) on a Kirksite die (vendors sold them at $350–$425; few may remain). The carb shroud is the same as a 1968 GTO (~$500 used; a repro has been around ~$300+). Foam seals, the carb lid, and the scoops are available as reproductions (the scoops have to be cut open).
Any proposed updates, changes, pictures, and/or corrections, please use our comment section below (may need to click on permalink to access comments feature). Information is subject to change and offered as is without any warranties or guarantees. Please review our Term's Of Use for more information.
Content last modified: June 13, 2026 at 10:06 am
← Frequently Asked Questions
I purchased a complete ram air kit in 2012 at Performance Years. I paid around $450 for the kit.
It was all metal also, not fiberglass. Works great!