I found that to be a big problem with the ring pliars I bought. You need to be able to apply significant force on the pliars with the handles nearly wide open. It also seems like they require the most grip when the pliars are open. That is the same time you need your free hand to guide where the ring goes. There's probably a good reason shops use powered tools.



Zip ties would be handy as an installation aid to pull the listing against the anchor wire when you're working without any help. You can set ties up a little loose so you can check fit side to side and front to back. Then tie it in with the rings. A agree, zip ties are not adequate for a permanant job.