@ 68bigbird, not sure about the volts to the coil, condensor is new, and got new points, gapped at 19 umm

@ bastereo, just had my carb rebuilt, to my knowledge it shouldnt matter if the carb was working or not, i should get a spark, correct?

Also, i just realized i MAY be gapping my points wrong, if they are touching, shouldnt it still spark?

But, i tested for a spark straight from the coil.. so it shouldnt matter about my points at all? or am i wrong?

Explain to me, if you could, how to gap points correctly.


Just so you know, my contact points are touching, and i gapped it by the rubbing block, on a flat side of a cam. Would this make the COIL not spark? let me know, thanks.