Ok, having a problem with the new full quarter panels that I got from Classic industries. The problem that my body shop ran into is that the left quarter panel isn't as wide as the right quarter panel. I've contacted Classic Industries and they are having their body guys look into it. The problem that my shop found is that the left quarter panel seems to be 1/4" smaller in width comparied to the right side. The measurements that were taken were ( left side 2 7/8" ) and ( right side 3 1/4" ). Now this measurement was taken an inch up from where the quarter meets the tail panel. The width that was measured is the top of the quarter where it meets the deck lid. If anyone is confused where I am talking about I can send a picture to show where. The help I need is someone who has a 67 with ORIGNIAL QUARTER PANELS to give me the measurements they have on their car. I'd like to know if mine or to short in the width or not. I haven't heard back from Classic Industries, but I'd like to be able to give them dimensions from someone who has original quarters...