I removed a Hurst 69 Z shifter from the 68 and the idiot cut the trans tunnel to get it to fit..the 1-2 was too far to the left. The shifter will work with that handle I believe...just need the correct mounting bracket.
Originally Posted By Fbody69
It's false. The shifter will not be 1-2 inches to the left. The offset is right and it will be in the right place in the tunnel. The Z does have the correct mounting bracket.
I DID NOT say, nor have I EVER said 1"-2" to the left (as you infer above). What I said is the 1-2 (shift) was to far to the left. You talk about people not reading correctly (as you have asserted in PM's to me) You constantly scathe others for not reading what you have written, in the context or application referenced.
Again, the SAME 69 Z-28 shifter was fine with the correct mounting bracket.
That is what I have said from the start..You add in what? reassertions of what I already confirm..Thanks.
Si Vis Pacem Parabellum
1967 Starlight black PMD Engineering 400 Auto 1968 Alpine Blue 400 4 speed 1968 Verdoro Green 400 HO 4 speed 2013 1LE 2SS/RS Inferno Orange Camaro.
The Z does have the correct mounting bracket. 
