.......I just thought of something else. There are 2 kinda "C" shaped guides that are adjustable on the top/inside of the door. You can see them with the panel off. At first glance they look the same, but they aren't. One is a little bigger (the rear one I believe), than the other. If you get them mixed up, the panel will not fit right. You also have to have them adjusted so the the panel will "catch" under the "C" part. You have the inside of the door in front of you, lay the top of the panel on the door, line up the door lock with the hole in the panel, lift the bottom of the panel to where the metal plate on the top of the panel "catches" those "C" shapes guides, and let it drop. Wiggle it a bit to line up the other holes, should be good to go. If this doesn't work, may want to look into the panels themselves, aftermarket parts don't always fit as advertised. Whew! Hope that helps. Kelly