I am 99% sure I have the correct shroud, for the simple fact that my car did not come with a shroud on it, and I ordered one from Ames. Unless they sent me the wrong one it should be correct. It did fit perfectly with the radiator that was in the car. The Superior guy did say something about not being able to get the trans cooler that he used to use anymore. How are your holes spaced for the trans cooler? Is your upper hole near the top, or is it about 5-6 inches down from the radiator cap? That's my main concern, making sure that the upper threaded hole gets moved outside the shroud. If I take enough material off of the shroud I think it will, but it will be close.