Does anyone have a link for how to remove the a-arm shafts and bushings? I can see how you press out the lowers but how do the upper bushings come out with those shafts in there?
Hi, a bit late, but HERE is a link to some advice, and HERE they let somebody with a press do it...
I finally got to the dissambly of my Front end. Well, at least one side. Taking it apart was one thing. Still have to remove some ball joints and bushings.
I also noticed that with the front suspension out, it might be easier to get to the motor mounts. I have to replace those too. Anybody know which motor mounts are best? I the Classics Catalogue I can't seem to find which type is good for 67 326 engine; any suggestions?
Also, would adding a bigger swaybar make the car more stable? I have to measure the diameter before ordering the bushings set..
