i put in the engine like i bought it. You told me before (headers installing) that the heads are "Scheisse", but i want to try the engine before disassembling it. I don´t know which parts (pistons, cam) are installed, i only know that the engine (350cui of 1970) is 0.030 over. The problem is, that it has no low end torque, but runs very fine above 3500 rpm. It beginn to splutter above 4200 rpm (i think the valve train wasn´t matched to the cam, which is too sharp for the engine). Rear end is a 3.55. Intake is a 1968 HO with a Quadrajet of 1978 (original carburator is still there, but needs rebuilt) This weekend i will measure the cam and then decide what to do. Other heads (if i find some) or another cam. Maybe somebody has other ideas.
PS:Q and all other fgf-members: let me know, when you are in germany (near munich)
