Hey again.

So I've decided on the trans I'm getting and whilst looking up the speedo gear I'll need, I ran back into the problem of my rear end ratio. It's currently 2.56 which is good for top speeds but not acceleration so I want to swap the gears, keeping the same axle. I've been reading through the FAQs and I've read that 2.56 to 3.28 has been done and no more is possible, but also that 2.56 to 2.78 is all that will be possible...

Has anyone done / knows what my options are? Aftermarket or otherwise... I'm hoping for a 3.36 but would be happy with anything other than my 2.56.