The holes for the latch are already drilled in the webbing from the factory, whether your car came with the seat or not, the holes are already there. They are on the passenger side, upper left if you are inside the car looking at the rear seat/trunk divider (webbing). There are two small holes about 3/8" and they are about 3/4" apart and are verticle. Place the latch over the holes from the inside the car, have someone on the trunk side and have them place the flat, rectangular, threaded with two holes metal plate type thing on the back side of the two bolts. Then thread the two bolts into the holes in that metal plate and tighten. That's it...