Hey Bjorn...well, send them on down to record! Don't have too much experience with that kind of music, but I am sure I could get it down!
Ok, posted this to the list...but for some reason i haven't seen it come through yet...so I will post it here also:
Well, I had the guy come by the house today to assess my car and what we need to do to get it on the street. He seems like he is really busy...so I have no clue when this will happen. However, I am not sure what the best way to go about this...regarding which floor pan to get. The rear seat area, where the brackets are, are in great condition...and don’t needt to be replaced. However, the floor in front of the rear seats where your feet go is in bad shape on both sides...and the tunnel area near the seatbelt bolts is really messed up from a ujoint failure. The front floor is trashed, but not underneath the front seat mounts, and the area that slants up towards the firewall is intact, but very thin and weak from rust. So if I go with the complete floor pan (the big one piece) it would basically replace the backseat area that is in great shape and not the part in the front between the pan and the firewall??? That kind of sucks! Any suggestions?
