O.K. here is what I have so far....remember, I have had this over a year and it ran perfect until last Thursday so it has been wired like this for a while.
No horn relay.
The wire on the "s" terminal goes directly to the ignition switch (not fusible link just regular wire)
the big purple wire on the engine side of the fuse box-cut off at about 2 inches
Starter bench tests fine
Here is the kicker- the power cable to the starter-the huge red wire-does not work. It "looks" o.k. but there is 12 volts on one end, 0 on the other....gremlins
So, should I run power to the big purple wire, if so can I run it right from the battery?
