1969 Trans am Carbon fiber hoods with removable scoop inserts. These are 100% carbon fiber(12K 2x2 Twill weave) with automotive UV resistant clear coat on the surface, wet sanded and buffed to a beautiful high gloss finish. They have a full factory type of frame( dry carbon fiber, no clear coat) with 3/4" aluminum bar stock in the hinge mount area and are drilled and tapped ready to bolt to your hinges.
MADE IN THE USA Also available in carbon fiber: 69 Trans am spoiler 69 Trans am side fender scoops 69 Firebird Trans am center console, glove box door, A pillar moldings, Interior A/C vent covers and MORE.
Bolt On Style Hood (Not a Pin On Style)
* This hood will bolt directly to your hood hinges with no fitting at all, just bolt on and go to the show * Accepts your front hood latch. * Vacuum resin infused, not hand laid. * Beveled sides and front just like the factory hood. * Does include weave matching removable scoop inserts. * Does not include ram air tubes. * Will accept ram air tubes. * Light weight hood springs for a fiberglass hood are required. * You should use hood pins on the front of this hood to hold it down. * For those of you who want to remove your old hood latch and send it to us we will install it for an additional fee into your new hood. * Please call for details. * Fits: o 1969 Pontiac Trans Am models + Also fits 1967 - 1969 Firebird models +
+ Do to the nature of the beast, carbon fiber parts may have some weave distortion and may have very minor surface imperfections. + Buyer pays all shipping costs. + Allow 2-3 weeks for delivery
