Hey all.So I took a day off work to try to get everything back together. I have a car show next weekend I'd like to go to so I need to get things wrapped up. I got the block and rad flushed. Lots of goop. I flushed both in every way I could think of until I got clean water coming out. Than I put in the new 11-bolt short shaft water pump and the new fan. The pulleys for the water pump and the drive line up perfectly. But now the pulley for the alternator is about 3/8 of an inch off. The alt pulley is further forward than the water pump and drive pulleys.. I ordered a new alternator bracket to replace the cobbled together home built bracket and all the spacers that were on there before. I guess I am not done yet..
