The P.O. remote mounted the oil filter mount, according to him for clearance issues with the headers. I am planning on putting is back where it belongs. I have read that with the long branch manifolds an adapter was used along with the stock filter mount. I have a oil filter mount off of I believe a 69 GTO, it is tilted back toward the block slightly (30 degrees). I believe there are 2 versions of this oil filter mount, 1 with 90 degrees from the mounting surface, and 1 with approximately 30 degrees of tilt back toward the block.

Does the adapter that is used with the LB manifold tilt the filter towards the rear of the car ? Can I use the slightly tilted oil filter mount instead of the stock one?