Ok, well the pictures are gonna have to wait... cameras bein' tricky. SO basicaly i have the floor pans rusted through, some of the truck floor (back left, drivers point of view, near the wheel well) possibly most of the trunk floor, but it may just be sruface rust, some of the inner quarter panel area, right under the quarter windows, and rear frame members. Im under the impression most of this could be replaced *without* taking the body off, as long as i had an air chisel and some welding experiance, neither of which i have. But i am willing to learn to weld, ive heard people say if you get the easy kind of welder (mig or tig or something) its not that hard. Im just worried about cutting out the seat pans and cutting soemthing like the frame or other stuff in the process. So much stuff to do... just looking forward to be done with the dysassymbly part and back to what i like: putting stuff together.
