Thanks everyone. Earlybird, no problem, you definitely did not bring me down. You are dead on and it has been on my mind non stop. We just finished an early Bronco for my son, so we just went through all the surprises there. We will be doing everything ourselves, so that will save quite a bit. So far here is what we have found. All the supports, frame, underbody are clean, no rust. We do have the whole body and it is pretty decent. We will need to skin the rear quarters and a little on the bottoms of the front fenders. Interior is complete, will need seat covers and carpet kit minimum. Seems like a solid start. Right now we are going to get the subframe on and the car a roller so we can get the state to inspect it. I don't want to do it all twice so we are going to do all the bushings and the disc brakes now. It is overwhelming, but with this sight as a resource and my son who is incredibly mechanically minded hopefully we will have her done within 2 years. Thanks again.
