I used a MIG welder I got that wrong in my first post. Yes it's a gas welder and yes to the 4 T bolts. It was all down to my crap welding now I have the Chevy 10 bolt out on the deck and look at where the welds actually pentrated the axle it's no wonder it came out. No more welding for me!
I put my old Pontiac 2.56 axle back in just to get the car mobile today so I could get it back in the garage. My brother says he will reweld it for me as he done a couple before for his 56 Chevy belair he used to own and he thashed the nuts of that and never had an axle problem.
That U clamp fixing with to T bolts sounds good or even 4 or 1/2" ones I am planing on drag racing. Now all I need to know is where I can get some will Rockauto stock those? Remember I'm in the UK so I need some one who does International shipping Rock auto and Summit are good.
Last edited by ineedalager; 06/03/1105:28 PM.
67 Firebird 350, TH350 auto Convertible, B&M 3000 TC, 4bbl Edelbrock Performer carb and intake Black Jack headers,disc brake conversion. 10 bolt chevy axle with 3.73's and B&M Rachet shifter.
