Almost done with the install. As you can see, I went with the Ididit chrome tilt column, as you can't see there's a new PSC steering gear and an Ididit rag joint (or as they call it, a coupler).



Of course while I'm doing the work, I notice the ball joint on the passenger side lower A frame has fallen out. Time to take that apart and press in a new ball joint.



Also found my carb is leaking around where the accelerator pump rod enters the bowl. I knew I was going to have to pull the front bowl to install the new power valve, but didn't expect the leaks. I hope I can find the gaskets for this Demon carb.