Ok, I managed to adjust the passenger door but the other window really confused me. The thing is that the channel (that is lifting the glass) is to far out (I need to get it more to the inside of the car at the front end of channel). I think it should be adjusted with the ventilator division channel lower stud. But I followed the manual and lowered the window and loosened the nut but I couldn´t screw the stud. It´s only possible when the window been raised but when I screw the stud then, it´s niether gets in or out? Anybody have any ideas? Maybe it´s not the ventilator division channel lower stud that should be adjusted?
sorry that I don´t upload any pictures of the problem but I lost my camera cable.
