salmon 38, thank you for getting back with me, I appreciate it very much. Your detailed subassemblies is well thoughtout.
I have couple questions based on your outline.

1. In step 2 when installing the subassembly to the subframe horns and radiator support is the lower sheet metal in place tying both from fenders together? It would seem very hard to get the subassembly through the opening?

2. There is a hard plastic piece that protects the fender from the bumper. It appears that this must be screwed through the plastic, then the header panel and into the grill piece, before going on the car, as it is under the front fender when mounted? Is this correct?

The rest seems like the way to go, again thanks....Jim