well, i pulled the intake off tonight just to see if there was any issues there & everything looks fine. i drained the oil & no antifreeze in the oil. i looked at all the new lifters on the new cam & no issues on the lifter surface or cam lobes either. all the rocker arms look fine this time, no burnt oil issues. i was considering pulling the heads to check out the head gaskets but now i'm not so sure. i am going to pull the water pump & adjust the divider plates to fit closely with the water pump & also get a larger fan as well. i still haven't completely decided to not pull the heads but i figured i would have seen some sort of problem already.
