Yes, I read your long post with photos; very helpful, thanks. Another question, though: of the two endura headlight surrounds, one lines up pretty well with the fender and rubber strip between them, but the driver's side is about 1/4 inch low and is tilted-out from the fender about 1/4-1/2 inch along the bottom. Both fenders measure exactly the same height from the ground and the bumper is snugged-up to the endura surrounds pretty evenly. Given what you wrote about only fore and aft adjustment of the nose, can you suggest what's going on and how I can correct it?
Thanks very much, your comments have been very helpful.
