Does anyone have a link to where the studs should be that hold the windshield molding clips? I took over a '69 FB project from a guy that had taken the molding off. The windshield and back glass are in, but there are not studs all the way around. For example, I think in the front the studs are there on the passsenger's side pillar, but not the driver's side(I think some metal work was done there). I was going to buy some screw in studs in order to get the molding back on, but I can't really determine how many studs there should be in total, or where they should be. I've checked online, and I've tried the search funtion here...I've also checked the Fisher body manual. But all this has turned up nothing useful.
If anyone has any info, or a sketch that shows where these are supposed to be and what clips are used where, that would be a huge help.
