I got a new 8-gauge amp wiring kit. It has 17 keet of power lead. I am looking for suggestions on how to run the lead fromteh battery back to the trunk.
I removed the A/C blower motor that was in the fender well due to the installation of a Vintage Air system, and I put in a block off plate. Would you guys/gals recommend running the wire from the batterym, between the inner and outer fenders, through the block-off plate, down to the kick panel, down the rocker panel channel, and into the trunk?
If so, how am I supposed to go from the block-off plate in the cowl area into the kick panel area? I can't really go through the big hole there because the kick panel has a piece that goes into that hole. Ideas? Suggestions?
