Hello all;
I'm about to finish up my 68 Firebird. It's painted, got the new top, and is home in the garage. Unfortunately, the body shop failed to hook up some items at the end.

The gas gauge is showing about the 3 oclock position; from what I've learned, it's probably not hooked up. So, I got under the car. There is a ground wire from the fuel sender unit. Then there is a brownish-tan wire that comes from the fuel sender. The 68 service manual shows that this tan wire should connect to the fuel sender unit in a block with the license plate late (black wire). Here's my dilemma:

The tan wire is coming out from the "front" of the gas tank area, and was routed up into the trunk up near the passenger seat. It then just was sitting there. If you look at the trunk area near where the gas tank fill pipe runs, you can see the two connector block I think is mentioned in the service manual; one wire is black and runs off to the license plate. The other connector has nothing attached. I'm guessing that is where the fuel sender connects. And I'm guessing it's routed up the same hole that the license plate wire is coming up.

What I'd love is for someone to please look at their set-up. Tell me how the wire is routed from the fuel tank sender to the wiring harness. A pic would be wonderful as well

Thanks in advance! Supposed to be nice tomorrow, will get the car washed up and take some pics and post!