Getting a bit better, even did some welding for beer. A couple of more questions. First I'm going to weld a bung onto my exhaust for an air fuel ratio sensor. I checked with a magnet and since the magnet sticks to both am I safe to assume I can weld the bung to the pipe using S-6 steel wire? Do I set the welder to the settings for 1/16" pipe and put the heat mostly on the thicker bung?
Second I was given a Forney SL-225 stick welder by an old timer here on Pender. I got about 65 pounds of various size rods with it. They have been laying around for quite a while, some have white fur on them, are they junk?
