I am getting ready to install new radiator core support bushings in my 69. I believe in order to do this, I will need to remove the core support. If I am correct in that the core support will need to be removed for proper install of the new bushings, my question is whether or not I will also need to remove the fenders (which I really don't want to do). The core support looks to be one of the mounting/fastening points of the fender, thus my concern is that if I am able to loosen the fenders up enough to remove the core support, it may induce too much stress on some of the other fastening areas, ultimately bending metal where it's not supposed to bend. I did a thorough search of the forum, but couldn't find anything about this. Any thoughts? As always, thanks for guidance. Up to this point you all have been able to arm me with just enough info to be dangerous!