Hey guys, I am contemplating different options for a transmission swap and looking to see if people may be able to help with some of the stock measurements to compare to. I understand this may take input from various people since the parts need to be out of the car to measure, but if you have a Muncie, Bellhousing or Flywheel out of the car and can help out, that would be great.:

1. Length of input shaft from mounting face of trans to end of pilot
2. Length of pilot bushing area of input shaft
3. Approx centerline of shifter from mounting face of trans
4. Length of front bearing retainer from mounting face of trans
5. OD of front bearing retainer (prefer caliper measurement here)
6. Overall depth of bellhousing from engine mounting surface to trans mount surface
7. Distance from engine mounting surface of bellhousing to cluch ball
8. Flywheel thickness from clutch surface to rear of crank mounting pad


Thanks in advance.