Yep, you need a steering wheel puller, which you can get at an autozone, from their tool loaner program, I believe for free. You also typically need the key for this process, but since you dont, you will need to drill out the tumblers from where you put the key at. Here is a link that has a lot of good info in it for how to do this. http://www.nastyz28.com/forum/showthread.php?t=14176&highlight=ignition+switch+removal+ASAP I also attached a pic to where once you have the tumblers drilled out so you can rotate the Ignition Cylinder switch to the different positions, you can see where you need to put the screwdriver to remove the whole switch assembly. I hope that this picture is helpful in finding that ignition lock cylinder locking tab slot in the steering column head. The slot usually has a thin die cast skin over it and people search and search trying to find it. I also attached a pic of the ignition lock cylinders, the top one looks about like what the FB has and that lock tab pictured in the top lock is what you are trying to push down on with the screw driver to remove the whole assembly out of the column.