It's been a long process on the body work, but in the end it will be worth it. Here is some of the splicing in of the outer wheel house on drivers side. I didn't want to replace the whole thing so I replaced what was needed only. This side is getting a full quarter since the original was hit in this area and was garbage. I had to work the existing wheel house and straighten it also as it was damaged. The new drivers quarter fits really well so I'm happy so far. The other photos are from the passenger side that I repaired. I kept the original drop offs with my part number stamped in them. The previous owner had put a new quarter extension right over top of the hole and tacked and bondo-ed the seam at the mid-section of the quarter body line.

I couldn't find the picture where I test fitted the tail panel on the car too, but that fits pretty well also. Should be going together soon and not soon enough. It's been 4 years or so at about 3 hours per week.