I just put a new cam and lifters in my 68 firebird 350.
Question about setting the pushrods. I imagine is would be best to adjus/set the rockers them while I have everything open. I was thinking it would be best to set each pushrod/rocker when the cam lobe at the very top of its rotation, where the rocker arm pushes the valve all the way down. If I set it at this point with no slack wont that be the best way to set them or am I wrong here, maybe they should be set when they are at their lowest point, lifter all the way down.
Please provide some guidance. This is my first cam/lifter job. I do NOT want to screw it up. I prefer to set it all before I put the intake manifold back on.
