Ok. I found the little screws from hell that will not budge with all my might and a good squirt from PB Blaster. I think I now know why the previous owner masked this trim off and painted! Could these little screws be harder to get at??? Sheez. Next step is to grind the screw heads off - if by chance there is even enough room to get at them. They will not budge and I'm stripping the phillips heads off with every try - making it worse. I've even lifted the trim off from the outside with a screw driver and squirted some PB in on backs of the screws. Not happy right now. I think putting in new front coil springs was easier....