Hi Jamiel I also had some overheating problems recently and this is what worked for me. First I bought a liquid product at my local speed shop called WATER WETTER,this goes into the rad, ADDRESS Red Line Synthetic Oil corporation 6100 Egret Court Benica CA94510 USA Phone 707 745-6100. WWW.redlineoil,com. I then bought a spacer to move my fan further into my stock shroud. The fan blades should be roughly half way into your shroud and approx. 1/2 in. clearance between top of fan blades and shroud. Then i made sure I had a 50/50 mix water to coolant and kept the water level about 2 1/2 in from the top of my rad. I hope you try these cause they sure worked for me. No more overheating. Good luck Jimbo