Thanks for all responses, I’m planning on going with the NAPA mounts and plan to add a 3/16†shim just to make sure I clear the sub frame. Still waiting on feedback regarding the actual replacement process. As I mentioned, it seems that all nuts/bolts involved to remove before the motor mounts can come out are really hard to get to. Looks like it would be the 2 nuts from the upper support bracket, 2 from the lower support bracket, 2 bolts from the actual mount and one bolt from bracket to motor mount. Can they all be removed from underneath the car with the engine in place? Did you guys place the floor jack under the oil pan to raise enough to slide the out the mounts?
