Yup, HEI. You just remove the module altogether. The box only uses the pickup as a trigger. I think if you want to use the box to adjust the adv you have to go with something digital. More of a ECU setup. I did drill the dist housing awhile back and installed a zerk so I could occasionally lube the shaft from the top. I've been tempted several times to pull the trigger on a ready to run MSD dist. But then I hear about somebody that bought one and it went to crap right away and they had to send it back for work. Seems like their QC isn't what it used to be.
That same trip when my in-cap coil went out my buddy's coil crapped out as well 2 days later. This was my solution.